Step-by-step Guide to Installing a New Shower Unit

Step-by-step Guide to Installing a New Shower Unit

Blog Article

Call Today

Are you currently looking for critical information on How to Install a Direct-to-Stud Shower Enclosure?

A successful shower installation calls for cautious preparation as well as a great deal of job. In many cases, you will require to do three kinds of jobs: framing wall surfaces, setting up the plumbing, and completing walls.

Prep work

First of all, you must choose the sort of shower that you wish to mount. It is very important to determine whether the picked shower is capable of handling particular systems as well as can manage a safe degree of water through the central heating boiler. A lot of shower units nowadays are made to be adaptable to various water pressures (such as stored warm water and chilly mains).
It is likewise essential to think about the water stress as well as the preparation of the piping and also drain for the shower

Various Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be connected to the bath tap as per your demand, and the water temperature level can be adjusted by means of the faucets. Push-on mixers are cheap and also extremely basic to mount. Nonetheless, although the tube connection is simple, it is quickly removed. Furthermore, it is bothersome to readjust the temperature.

Bath/Shower Mixer: The hose as well as spray of this kind of shower are integrated with a bathroom mixer faucet, as well as the temperature can be changed with the bathroom faucets. It is a really inexpensive option and no extra plumbing is involved. However, the bath/shower mixers also struggle with troublesome temperature control options.

Manual Mixer: The tube and also spray of a hand-operated mixer shower device belong of the wall surface system as well as the hot and cold water supplies are attached to a solitary valve The temperature and pressure of the water are controlled via either one or a selection of knobs (in more pricey showers). Although temperature level control is much easier in manual mixer types, they are extra pricey than the previously mentioned mixers. They additionally need extra plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type are a part of the wall device as well as the hot and cold water products are linked to a single shutoff right here too. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to avoid it from becoming also hot. Among the most significant benefits of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a single system containing a powerful electric pump that can modifying both the water stress as well as temperature level. This type of shower can be fitted if there is water from a cold water cistern and also a hot water cyndrical tube. A power shower makes the adjustment of both pressure and temperature very easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is provided by a combination central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is very important to note that for this shower type to be mounted, the mains pressure needs to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature as well as stress to be readjusted using a knob. Designs with temperature level stabilisers are much better as they remain unaffected by various other faucets in other places in use within the home. A significant downside of electrical showers is that the control knob only enables the alternative of heats at less stress, or reduced temperatures at a better pressure. This is problematic in the winter season when the spray is usually weak and also the mains water is colder. Nevertheless, this issue is tackled in some versions which are readily available with a winter/summer setup.

Method

Depending upon the sort of shower you wish to install, the shower head need to either be suited order to prevent its contact with the water in the bath below or the base tray, or it should have a check valve.
Prior to beginning, it is advisable to mark the placements of the shower head and also control, and also to prepare the pipe-work involved. Furthermore, the drain system to eliminate the drainage will certainly require to be intended. Both placements of the cable path and also the shower button will likewise need to be taken into consideration if a rapid or electrical shower device is being mounted.
Make use of the direction guide provided with the shower device to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to cut off the water supply. In order to shield the pipes, they need to be provided a waterproof covering as well as likewise fitted with separating shutoffs. The pipes can then be hidden into the wall surface and also glued over to neaten the overall appearance.
Fit the base tray, shower head, and also installations.
Attach the major shower control to the pipes that will be providing the water (This might need a female screw thread adapter).
Reconnect the water system as well as examination the pipes for any kind of leakages, as some may require tightening up.
If you are installing an electric shower, keep in mind to turn off the power supply before making any kind of electrical links. When these links have been made (there should be support within the instruction manual), the power supply can be changed back on.

Adjusting Water Pressure to Match Your Shower

The cold water tank can be raised to a higher elevation (in some cases just 150mm (6inches)) by installation a strong wood support underneath it - possibly composed of struts and also blockboards. If you choose this alternative, the main and distribution pipelines will likewise need to be raised to satisfy the brand-new height of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be connected into the power supply in order to operate.

Piping and also Water drainage

It is best to use 15mm diameter supply pipes, and also make the go to the shower as short as well as straight as feasible so regarding preserve optimal stress and minimise warm loss. In addition, by minimising the use of elbow joints for pipeline corners, you can lower the resistance in the circulation of the water supply. You can achieve this by bending the pipes instead.

A Lot Of Usual Blunders

Going against or ignoring local code limitations.

Utilizing pipelines that are also tiny.

Affixing copper to galvanized without making use of a brass or dielectric suitable in between the two.

Not using tape or pipe compound at threaded joints.

Not leveling your fixtures when mounting them.

Not mounting an air space loading for components.

Cutting supply stub outs as well brief to set up the shutoff valves onto after the completed wall is in place.

Not appropriately straightening tubes into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will certainly trigger a leak.).

When turning the water back on in your house, constantly run the outdoors tube shutoff or flush your toilets to bleed dust as well as air from the lines. This debris can cause troubles in your sink taps as well as other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

Hopefully you enjoyed reading our part about How to Install a One-Piece Shower Unit. Thanks for taking the time to read through our piece. Are you aware of another individual who is excited by the niche? Take a moment to share it. I recognize the value of reading our article about How to Install a Shower Enclosure .

Request An Appointment

Report this page